Chimney Repair Across Lake, Porter & LaPorte Counties
Crumbling mortar, cracked crowns, leaks and loose brick — inspected free, photographed, and fixed at one flat price you approve first.
Chimney damage usually starts small: a hairline crack in the crown, a mortar joint that lets in a little water, flashing that lifted an inch in a windstorm. Northwest Indiana winters turn those into bigger problems quickly — water gets in, freezes, expands, and widens the gap every time the temperature crosses freezing.
We start every repair by photographing the damage from the roof and, when needed, inside the flue. You see what we see, you get one flat price in writing, and we fix what's actually broken instead of replacing things that are still sound. Repair estimates are free.
Warning signs it can't wait
- Crumbling or missing mortar between bricks
- Bricks that are flaking, cracking or popping their faces (spalling)
- White staining on the chimney's exterior
- Water stains on the ceiling or wall beside the chimney
- Cracks across the concrete crown on top
- Rust on the damper or firebox
- Pieces of masonry on the roof or in the firebox
- A chimney that leans or pulls away from the house
Seeing two or more at once? Stop using the fireplace and call — that combination usually means the system is struggling or unsafe to run.
Repairs we handle most in the Region
- Mortar joints repointed with a matching mortar
- Cracked crowns sealed or resurfaced
- Failed crowns rebuilt properly
- Flashing resealed or reset where the chimney meets the roof
- Spalled bricks replaced with matching brick
- Caps and chase covers replaced
- Breathable waterproofing applied to the masonry
- Firebox and smoke chamber repairs
- Liners installed when the flue is damaged
What chimney repair costs
Free repair estimate (photo-documented): $0. Mortar joint repointing (per section): $250 – $550. Crown seal / resurface: $250 – $450. Crown rebuild: $600 – $1,400. Flashing reseal or reset: $300 – $600. Spalling brick replacement (per area): $350 – $900.
| Repair / service | Typical price |
|---|---|
| Free repair estimate (photo-documented) | $0 |
| Mortar joint repointing (per section) | $250 – $550 |
| Crown seal / resurface | $250 – $450 |
| Crown rebuild | $600 – $1,400 |
| Flashing reseal or reset | $300 – $600 |
| Spalling brick replacement (per area) | $350 – $900 |
What you get
See the Damage First
Roof-level photos show exactly what's wrong before you decide anything.
One Price, In Writing
The flat quote you approve is what you pay — nothing grows once the work starts.
Licensed & Insured
Licensed and insured masonry and chimney technicians, named before they arrive.
Fixed Before the Next Freeze
We'll tell you what should be done before winter and what can wait until spring.
Free repair inspection
We inspect, photograph the problem and quote one flat price — free, and you decide after seeing the photos.
How it works
Photograph the damage
Roof-level photos of the crown, flashing and masonry, plus a flue look when it's relevant.
Explain what matters
We separate what needs fixing now from what can wait until spring.
One flat quote
You get a single written price before any work begins.
Prepare and protect
The work area, roof and landscaping are protected before we start.
Do the repair
Materials are matched to your chimney and the work is photographed as it goes.
Show the result
You get after photos of the finished work and a clear invoice that matches the quote.
Chimney Repair questions
How much does chimney repair cost?
It depends on the damage: repointing mortar runs $250 to $550 per section, crown sealing $250 to $450, a crown rebuild $600 to $1,400, flashing $300 to $600 and spalled brick replacement $350 to $900 per area. Estimates are free.
Is there a chimney repair service near me in Northwest Indiana?
Yes — we repair chimneys throughout Lake, Porter and LaPorte counties, with free photographed estimates.
Can a cracked chimney crown be repaired?
Surface cracks can usually be sealed or resurfaced. If the crown is crumbling or wasn't built as a proper crown, rebuilding it lasts much longer. The photos make it clear which one you need.
Why does freeze-thaw damage chimneys so much here?
Water gets into small cracks, freezes, expands and pushes the crack wider. Region winters cross the freezing mark many times, so a small problem in fall can be a big one by spring.
Should I repair or rebuild my chimney?
Most chimneys can be repaired. A rebuild makes sense when the masonry is failing throughout or the chimney is leaning. We'll show you the photos and give you both options if both apply.
Can you repair chimneys in winter?
Many repairs can be done in cold weather; some masonry work needs temperatures above freezing to cure properly. We'll schedule accordingly and tell you if a temporary fix makes sense.
Do you repair leaks around the chimney?
Yes. We trace the water to the actual entry point — crown, flashing, cap or the brick itself — and fix that.
Will you tell me if something can wait?
Yes. Not every crack is urgent, and we'll say so plainly.
Ready for a safer, cleaner chimney?
Same-week appointments, honest flat pricing, no scare tactics — and same-day emergency service when it can't wait. Licensed and insured.